OPNsense Forum
English Forums => Hardware and Performance => Topic started by: chepavel on September 27, 2020, 03:04:21 pm
-
Hello,
I try to configure my D-Link DWM-222 LTE modem on OPNSense 20.7.3.
This device is supported since FreeBSD 11.4, however, it doesn't initialize:
ugen2.3: <Mobile Connect Mobile Connect> at usbus2, cfg=255 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0201
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x2001
idProduct = 0xab00
bcdDevice = 0x0228
iManufacturer = 0x0001 <Mobile Connect>
iProduct = 0x0002 <Mobile Connect>
iSerialNumber = 0x0003 <c2ebf396cfb2>
bNumConfigurations = 0x0001
Did anybody here had success making this device work with OPNSense? I'd be more than happy to get some suggestions! :)
Thanks,
Andras
-
I try to configure my D-Link DWM-222 LTE modem on OPNSense 20.7.3.
This device is supported since FreeBSD 11.4, however, it doesn't initialize:
Hi, @chepavel,
What do you mean by "is supported by FreeBSD 11.4"? Can you explain where that information comes from?
-
Question,
You try to install OPNsense on that dongle? (I hope not)
Or you try to use that dongle as modem conencting it to OPNsense?
If the later than check this >
https://docs.opnsense.org/manual/how-tos/cellular.html
Regards,
S.