Installed the ntopng and redis from plugins both are running but unable to access the webpage using http://<IP>:3000. Reinstalled the several times but still same issue.
root@opnsense:~ # service redis status
redis is running as pid 52830.
root@opnsense:~ # service ntopng status
ntopng is running as pid 86522.
root@opnsense:~ # sockstat | grep -i ntopng
ntopng ntopng 86522 1 udp4 192.168.2.1:62447 *:*
ntopng ntopng 86522 3 udp4 *:* *:*
ntopng ntopng 86522 6 tcp4 127.0.0.1:45887 127.0.0.1:6379
ntopng ntopng 86522 7 tcp4 127.0.0.1:26751 127.0.0.1:6379
ntopng ntopng 86522 8 udp4 *:* *:*
ntopng ntopng 86522 9 udp4 *:* *:*
ntopng ntopng 86522 11 tcp4 *:3000 *:*
ntopng ntopng 86522 12 dgram -> /var/run/logpriv
any idea, appreciate the help.
Firewall Block?
it was firewall but there was no block rule. i just added custom gateway on my LAN Firewall
which cause the problem, I remove it and then I able to reach it ntopng web interface.
Thanks for your help to hint it.
I've same problem
Post your LAN firewall settings. Please make sure not using custom gateway.
I've attached my fw config
Try to remove GW_LAN and make it all (*) under gateway.
Thank you, now works fine