Text only | Text with Images

OPNsense Forum

Archive => 20.7 Legacy Series => Topic started by: ljrickwood on August 03, 2020, 11:37:31 AM

Title: Installer panics on Via ITX board
Post by: ljrickwood on August 03, 2020, 11:37:31 AM
I'm trying to install the VGA image of 20.7 on a VIA EPIA-M290-16QE.

Ubuntu and Xubuntu install on it and run, and Memtest+ reports that the RAM is healthy.

Are there any known issues with 20.7 on VIA hardware or with VIA CPUs?
Title: Re: Installer panics on Via ITX board
Post by: the-mk on August 03, 2020, 04:34:33 PM
does the VIA CPU have x64?
Title: Re: Installer panics on Via ITX board
Post by: ljrickwood on August 03, 2020, 05:11:36 PM
Yes - it's a VIA Eden X4, a quad-thread 64-bit, CPU.

I bought the 64-bit board to replace the previous VIA ITX 32-bit motherboard which had a single threaded C7 CPU.

The 32-bit versions of OPNSense have worked flawlessly on the previous board, so I was quite surprised when the 64-bit version failed out of the gate on the new board.
Text only | Text with Images