Text only | Text with Images

OPNsense Forum

Archive => 20.1 Legacy Series => Topic started by: danbet on July 05, 2020, 05:55:21 PM

Title: VLAN Tag on the WAN interface
Post by: danbet on July 05, 2020, 05:55:21 PM
On a new internet access my provider says, that I have to configure VLAN tag 10 to receive the signal. Is it enough to add the tag 10 under other types, VLAN? Or do I have to assign this created VLAN to the WAN interface instead of igb1 under assignements?
Title: Re: VLAN Tag on the WAN interface
Post by: banym on July 05, 2020, 06:09:45 PM
you have to assign the vlan interface as wan to make use of the vlan 10
Title: Re: VLAN Tag on the WAN interface
Post by: danbet on July 06, 2020, 10:33:48 AM
OK, thank you very much.
Text only | Text with Images