OPNsense Forum

Archive => 20.1 Legacy Series => Topic started by: redbull666 on June 07, 2020, 05:15:18 pm

Title: Router keeps crashing on me
Post by: redbull666 on June 07, 2020, 05:15:18 pm

I am running Opnsense on a brand new SuperServer E200-9A. Sadly, it keeps crashing with kernel page faults.

https://paste.gg/p/anonymous/d356815f41644a658fd5048a191d5005/files/2f6b5318f60a4ef6905fbb422e5c5768/raw

Any thoughts? Anything I could try or do? Is this likely a hardware issue with the RAM or SSD for example?

Title: Re: Router keeps crashing on me
Post by: redbull666 on June 07, 2020, 06:14:02 pm

Same issue on 20.7 so far.

Now testing with all plugins uninstalled.

Title: Re: Router keeps crashing on me
Post by: redbull666 on June 11, 2020, 12:38:55 pm

After many days of testing, enabling/disabling things, the issue appears to be in the Shaper. I have not had any hard crash with the shaping rules disabled (am using weighted queues).

Anyone else seen this issue?

Title: Re: Router keeps crashing on me
Post by: franco on June 12, 2020, 08:31:58 am

Is this the WFQ scheduler? Some people reported glitches over the years, but in FreeBSD the topic to improve on those crashes is nonexistent to my knowledge.


Cheers,
Franco

Title: Re: Router keeps crashing on me
Post by: redbull666 on June 16, 2020, 02:58:24 pm

Quote from: franco on June 12, 2020, 08:31:58 am

Is this the WFQ scheduler? Some people reported glitches over the years, but in FreeBSD the topic to improve on those crashes is nonexistent to my knowledge.


Cheers,
Franco

Yes indeed it is !

I just replaced the SSD, restored configuration, was stable for days. Then re-enabled the Shaper and had a crash within 5 minutes...

I am not sure I had this problem when I used the "regular" shaping, will test this.