Print Page - OPNSense 20.1.5 - Routes lost on reboot

Title: OPNSense 20.1.5 - Routes lost on reboot
Post by: leacho73 on April 30, 2020, 12:31:02 PM

Hi All,

I noticed this morning that following a reboot of my OPNSense 20.1.5 box - I had lost connectivity to a number of networks. Checking System -> Routes -> Configuration showed that the routes were listed, however when going to status - they are not shown.

I was able to get them into the route table by going into the route and re-saving/applying it.

These are internal networks and not VPN routes.

Is this a bug, or am I doing something wrong?

Thanks

Title: Re: OPNSense 20.1.5 - Routes lost on reboot
Post by: mimugmail on April 30, 2020, 02:20:47 PM

IPsec Peer in config is FQDN or IP?

Title: Re: OPNSense 20.1.5 - Routes lost on reboot
Post by: leacho73 on May 01, 2020, 03:48:17 PM

IPSec peer is IP based - but the routes which are being lost are not VPN routes, they are just on a different network segment of the local network

OPNsense Forum

Archive => 20.1 Legacy Series => Topic started by: leacho73 on April 30, 2020, 12:31:02 PM