I have followed this:
https://tofanos.com/gabri/?p=41
For the below Rules, which section do I want? Floating, etc?
In all the sections, the ones below in red are not in the latest firmware unless I am missing something.
Can someone give me some assistance?
Thank You,
Todd
– Go into the Rules Tab and add a new rule that is going to apply our traffic shaping on for the upload speed, and configure it as follow:
Enable: checked
Interface: WAN
Proto: IP
Source: 10.0.0./24 (it should be your LAN subnet)
Destination: Any
Target: WANup
Description: WANup
Anything else leave it as default
Click Save
Then create a new rule for shaping the download speed:
Enable: checked
Interface: WAN
Proto: IP
Source: 10.0.0./24 (it should be your LAN subnet)
Destination: Any
Target: WANdown
Description: WANdown
Anything else leave it as default
Click Save
Click Apply at the bottom of the section
You should go in the Rules tab of the page, not the general firewall rules on the left menu.