Hi folks, I hope you can help me.
I just installed OPNSense: seems to work out of the box! I am running it on a laptop with VMWare Workstation Pro installed.
I am running several more VM's on this host. However, I made a small booboo when configuring the network.
Current situation:
OPNSense VM with two bridged network adapters.
One adapter bridged directly do my cable modem (wan).
One adapter bridged to a switch (lan).
I forgot that if I bridge both my physical adapters the rest of the VM's on the host will only have the wifi adapter to bind to. Meaning that I now have my NAS/Nextcloud running via the wifi interface of the laptop :(
Can anyone advice me on what the best way is to correct this? Can I just set the (lan) interface to NAT on the host? Or host only even? I cannot attach a third ethernet card, so that is not an option :P
Ok, here's what I did to fix it.
My onboard NIC can only receive an IPv4 address from my provider _in the OPNSense vm_ so I disabled IPv4 on the host. Of course, there is no need for this on the second adapter since that will just get a dhcp address from OPNSense.
So I enabled the IPv4 stack for the 2nd adapter and voila: works.
I might be better off not doing stuff like this at 2AM :P