OPNsense Forum
English Forums => General Discussion => Topic started by: windswept321 on March 31, 2020, 02:46:00 pm
-
I have a thin client running Opnsense with 1 gigabit PCI card and a built-in gigabit adapter (AMD G-T44R Processor, 4gb ram).
Testing with an ECI openreach modem, I get an initial connection of 5mb, which drops to 4mb when reconnected, then dies after. No reconnection will occur at this point. I then need to switch to the NowTV box to get a working connection again to try again or to have reasonable speed.
I'm wondering if something is wrong with my connection settings as the guide I followed mentioned a setting which seems to now be missing from Opnsense - Directly send SOLICIT.
Here are screenshots of my interface settings.
Does anything seem incorrect or is there likely to be some other issue I'm not understanding here?
(https://ibb.co/zffkRDM)
(https://ibb.co/6J2LgJY)
(https://ibb.co/rZxMhPT)