Hi
I'm new to OPNsense, managed to install and get the basic firewall working, I would like to add softether plugin. I'm unable to find any documentation on how to go about it.
https://github.com/opnsense/plugins/tree/master/security/softether
Appreciate any help.
Thank you.
It appears softether is currently only available if you are on the dev path.
Thank you for the answer.
How can I still install softether without going to the developer branch?
You can also install on the production branch.
Via CLI:
pkg install os-softether-devel
There is only a start button for managing the server. The rest is done via the usual fat client since I don't want to double the work.
Feedback would be nice, then I could release it to stable :)
Thank you for the answer.
Installed!
Will it start automatically after server reboot?
When you Enabled it via VPN - Softether it will autostart.
Thanks for the answer.
will it be run as root?
I need a bridge function.
https://www.softether.org/4-docs/1-manual/3._SoftEther_VPN_Server_Manual/3.6_Local_Bridges
Bridge is unsupported in FreeBSD if I remember correctly ... :/
As I understand it from the link I published above.
There is support.
If I remember correctly when installing the software the comes a pkg message saying brdige is unsupported?
did not pay attention to it.
Check, I will write in this thread about the result.
Thx, appreciated :)
Set up a bridge.
Remote PC, received ip, gateway, DNS via DHCP.
But on the remote PC there is no access to the local network, the gateway does not flicker.
Ping only wan ip opnsense.
Do I understand correctly that it is already necessary to configure the opnsense firewall?
Can the bridge function be considered working?
Can you try this Advanced Nat mode or similar?
I did not understand you.
Enable NAT on the softether switch?
https://www.softether.org/3-spec
Requirements
Supported Operating Systems
Windows (32bit, 64bit)
Windows 98 / 98 SE / ME / NT 4.0 SP6a / 2000 SP4 / XP SP2, SP3 / Server 2003 SP2 / Vista SP1, SP2 / Server 2008 SP1, SP2 / Hyper-V Server 2008 / 7 SP1 / Server 2008 R2 SP1 / Hyper-V Server 2008 R2 / 8 / Server 2012 / Hyper-V Server 2012 / 8.1 / Server 2012 R2 / 10 / Server 2016
Linux (32bit, 64bit)
Linux 2.4, 2.6, 3.x, 4.x
Mac OS X (32bit, 64bit)
Mac OS X 10.4 Tiger or later
FreeBSD (32bit, 64bit) (Stable Edition: Server and Bridge only, Developer Edition: Client is also supported)
NetBSD (32bit, 64bit) (Developer Edition only, Client is also supported)
OpenBSD (32bit, 64bit) (Developer Edition only, Client is also supported)
Solaris (32bit, 64bit) (Server and Bridge only)
Solaris 8, 9, 10, 11
Another Newbie to Opnsense, Would be great to see softether as a plugin, such a versatile vpn.
Just a fresh sysadmin, so cannot contribute much technically but happy to contribute some beer money.
Via CLI
pkg install os-softether-devel .. then go to VPN : Softether and enable. After this use the known fat client to connect and configured. If it works for you and you can vpn in I can make it stable
Good day.
The softether daemon does not start.
Please help in this matter.
Any ideas how to identify and fix the problem?
Change port of OPNsense webUI other than 443?
I have installed softether package and it is not showing up in VPN and not running. How do I get it to start so I can configure it?
OK, figured out where to enable softether so it can be started from the cli. Need help on why it is not showing up in VPN menu and how to make it auto start at boot.
pkg install os-softether-devel
Thanks
Hopefully this is my last question.
I currently have softether running on a rpi. I have a Port forwarding NAT setting and a floating rule to allow 1194 UDP traffic in to any. Not sure if that is the correct way, but it is working. Once I configure SoftEther on the opnsense box, how do I direct the 1194 UDP traffic to the firewall instead of the rpi?
I'm looking for the same answer as you need. แทงบอลสเต็ป (https://inworldz.com/%E0%B8%9A%E0%B8%AD%E0%B8%A5%E0%B8%AA%E0%B9%80%E0%B8%95%E0%B9%87%E0%B8%9B/)
Quote from: Rogero on August 06, 2020, 06:17:22 PM
Hopefully this is my last question.
I currently have softether running on a rpi. I have a Port forwarding NAT setting and a floating rule to allow 1194 UDP traffic in to any. Not sure if that is the correct way, but it is working. Once I configure SoftEther on the opnsense box, how do I direct the 1194 UDP traffic to the firewall instead of the rpi?
Just disable the port forward and allow it on WAN (UDP / 1194)
You can also install on the production branch.
Via CLI:ข่าวกีฬาออนไลน์ (https://footballhits98.com/)
pkg install os-softether-devel
There is only a start button for managing the server. The rest is done via the usual fat client since I don't want to double the work. ;) ;)
Hav a nice day.
The softether daemon does not start.
Please help in this matter.ข่าวกีฬาออนไลน์ (https://footballhits98.com/)
Any ideas how to identify and fix the problem?
Change OPNsense port to other than 443 and restart