Print Page - Port 80, 443 forwarding issue

Title: Port 80, 443 forwarding issue
Post by: meazz1 on January 21, 2020, 03:23:47 AM

I'm new to Opnsense and that must be my short comings, my problem figuring out how to successfully accomplish this simple thing.
I have looked every where, googling, opnsense forum, but can't get this two ports forwarding to work correctly.

Is there a write up or a tutorial someone can point me to?
Do I have to add something to alias tab or firewall rules? Any help?

Here are some screenshots of my failed attempts. The screenshots are for "http" but "https" has the similar entry.

(https://lh3.googleusercontent.com/hnbhaCe0QMWokHLazEC5TNGfX9EVpzYHthpQdP-j_Yym4PE5zEEt1umwa5mdGu8e7v2dbMBjqTFRB_BtBsyGLJyfl-nqXecSvJqmxfnjQ4oc2f4NdGs-GRRW3BEjQxGmbVahx9pVYg=w2400)

(https://lh3.googleusercontent.com/qpsMUZR9bDquYevJr9DiF-Ywq_sU148Dl0jGyHYpLQpt3kmBufPDKb2g0EpOYk73fAkerXZr4TP4iHJMNoh1bsq2DA5T9rmdoOSKS3E8814vtfT6ppn3qG5YUCGWYYrjZwmorSigtQ=w2400)

(https://lh3.googleusercontent.com/mza3POWGrzLJgeKxkxikRTLlzVBB6CISqtnozpTDxTHUCkW6bG_6XCjt8ZYZhKtjuvkbNOF00m3FNYPi8fF2AIA50TW0V8_fyA6PXVHKZJUKrVZyAJSlZuOydASld1EBefU0Be8jmQ=w2400)

(https://lh3.googleusercontent.com/1bex-2ZIIhJ1LCiFsmJVe7qXcWOfqfv2KJf8EEK3kZXA9zzHra4Frn9_-CXvEGJAkKtbd54-ZnJhHFfU8hkoYb7MyrNvfvtNVOfF_xGeh0JK4fU4yPT-Yg_kOXCAWgWOI43fcM3zjQ=w2400)

Title: Re: Port 80, 443 forwarding issue
Post by: allebone on January 21, 2020, 04:30:13 AM

Did you already check the machine you are forwarding ports to does not have a local firewall (eg windows would have a windows firewall) that needs them opened on?

Title: Re: Port 80, 443 forwarding issue
Post by: siga75 on January 21, 2020, 07:54:48 AM

destination address should be "WAN address", NAT IP should be where you want the packets to be forwarded, makes no sense to have the same IP on both fields, it would means no forwarding is needed

OPNsense Forum

English Forums => General Discussion => Topic started by: meazz1 on January 21, 2020, 03:23:47 AM