Text only | Text with Images

OPNsense Forum

English Forums => General Discussion => Topic started by: aaa.aaa on January 13, 2020, 02:59:03 PM

Title: Problem with load balancer feature
Post by: aaa.aaa on January 13, 2020, 02:59:03 PM
hi
i have a group gateway that consist of three three wan gateway on dedicated interface on tier 1 and all are up  and no packet loss or high latency issue,and when they are  individually set as gateway no problem occurs
But when i set the group gateway that i mention to relative fw rule  some clients get delay on internet connections specially when i enable sticky connection that make a few second delay to couple of minutes  delay . notice only some of the clients get delay while others work good and that keeps happen to other clients.
plz Help
Title: Re: Problem with load balancer feature
Post by: aaa.aaa on January 21, 2020, 07:12:02 PM
any tips or trick could be helpful!
OR atleast point me somewhere that i can find more.
Title: Re: Problem with load balancer feature
Post by: Goombadave on April 29, 2020, 04:37:54 PM
I have the same issue and can't seem to figure this one out. Followed the documentation but still no change. I don't think it should matter that both WAN connections are on the same physical NIC
Title: Re: Problem with load balancer feature
Post by: mscd on July 07, 2021, 07:24:01 PM
Same problem here with "sticky connections" turned on (OPNsense 21.1.7) ... this is really disappointing ! ... WAN-load-balancing is a "must-have-feature" in a "production-use-ready" firewall appliance.

Any hints to get this properly working? If I deactivate "sticky connections" (which seems to be counterintuitive for me) the client-connections seem to behave more stable.

Best regrads,
mscd
Text only | Text with Images