OPNsense Forum

English Forums => Hardware and Performance => Topic started by: Flux on January 09, 2020, 01:20:29 PM

Title: cant conect to my NAS
Post by: Flux on January 09, 2020, 01:20:29 PM
The nas is in the same subnet with opnsense ,example opnsense 192.168.1.1
my nas 192.168.1.10. my pc 192.168.1.100

I can ping the nas from Opnsense i get replay. but not from pc (same subnet)
I can se the nas in Windows under network ,but canot conect ,gett error messages
Have portforwarded port 5001 to webinterface ,cant conect nas webinterface

Before i try Opnsense i had Edgemax x router it workt no problem att all.

Thank you in advance :)
Title: Re: cant conect to my NAS
Post by: chemlud on January 09, 2020, 01:46:56 PM
Traffic between hosts on the same subnet does not even hit your perimeter firewall, no matter what it is. ;-)

Most likely the firewall of your Windows machin blocks pings. And reboot your NAS (whatever it is) and your switches. See if it helps. Again: The firewall is not part of this game (except for DNS and DHCP)...