hi at all,
i'm new to opnsense but got my private setup working like this:
opnesense 19.7 on an A2SDI-H + I350 qad nic
LAN (incl. vlan) on the 10G
wan1 (pppoe) on I350 port
wan2 (lte) on I350 port
now i want to use netflow.
my netflow server is 192.168.10.60/24 which is behind an ipsec tunnel.
my opnsense has vlan1 192.168.0.1/24.
since i haven't recieved any data on my prtg i checked by console and saw, that the firewall can't reach the server, since it's using it's wan IP. So i created a outbound nat telling WAN1 target Server use VLAN1 Interface ip, since then i use "ping -S 192.168.0.1 192.168.10.60" i can reach the server via the tunnel.
can you advice me please, where are my thoughts incorrect..
thank you
br
snoopy78