Print Page - Port Forwarding Range to Single Port

Title: Port Forwarding Range to Single Port
Post by: fegauthier on September 27, 2019, 02:50:44 PM

Hi guys!

I want to forward a range of udp port from 14000-15000 to 13000 on a specific ip target. I don'T know why but it doesn't want to set 13000 as the redirected port. It always put a range. I don't want a range... I want that every port between 14000 to 15000 be redirected to the 13000. Does someone can help me with that?

(https://i.imgur.com/CzZtaQb.png)

(https://i.imgur.com/RFrunV1.png)

Thanks

Title: Re: Port Forwarding Range to Single Port
Post by: fegauthier on September 27, 2019, 04:50:24 PM

I finally used Alias and it's working.

Thanks

Title: Re: Port Forwarding Range to Single Port
Post by: franco on September 27, 2019, 05:54:50 PM

Make sure it doesn't translate to 13000-14000. I remember you only set the start port and it expands the rest, but could be mistaken.

Also, split ranges in the alias won't work so you need one alias for each range.

Cheers,
Franco

OPNsense Forum

Archive => 19.7 Legacy Series => Topic started by: fegauthier on September 27, 2019, 02:50:44 PM