Print Page - Firewall statistics show N/A for most of the rules

Title: Firewall statistics show N/A for most of the rules
Post by: JasMan on July 19, 2019, 10:19:26 PM

Hey,

When I switch to the "Inspect" view in the overview of any interfaces firewall rules, most of the statistic columns shows "N/A". Only the NAT and Floating rules shows values for states, packets and bytes.

Do I have to enable something to see the statistics for all rules?

Thanks.

Jas

Title: Re: Firewall statistics show N/A for most of the rules
Post by: JasMan on July 21, 2019, 01:07:33 PM

Has nobody else this issue?
Could some of you please confirm then, that the statistics are working fine for you so that I can open an issue. Thank you.

Title: Re: Firewall statistics show N/A for most of the rules
Post by: ruffy91 on July 21, 2019, 02:12:37 PM

For me it does not show NA for any rule.
Some are on 0 and 0 bytes because they have never been hit but thats it.

Title: Re: Firewall statistics show N/A for most of the rules
Post by: mimugmail on July 21, 2019, 02:43:39 PM

For me also ok, plenty of 0 rules but most important ones look good.

Title: Re: Firewall statistics show N/A for most of the rules
Post by: JasMan on July 21, 2019, 05:22:04 PM

Thank you for your responses.

Any idea why I only see N/A?

Title: Re: Firewall statistics show N/A for most of the rules
Post by: JasMan on August 02, 2019, 06:57:29 AM

Issue opened :)
https://github.com/opnsense/core/issues/3620

OPNsense Forum

Archive => 19.7 Legacy Series => Topic started by: JasMan on July 19, 2019, 10:19:26 PM