Hello,
I recently purchased a DEC630 OPNSense router.
I'm trying to setup the router the following way:
1 WAN
OpenVPN client connection 1 -> LAN 1
OpenVPN client connection 2 -> LAN 2
Right now, I can only connect the 2 LANs with 1 OpenVPN client connection. But I'm unable to separate them properly.
Anybody here who knows how to do it ?
Many thanks.
Franck
Hi!
In the openVPN server config (Local network) you define, which networks are reachable for this VPN client.
The fine-tuning can be done on the Firewall -> Rules -> OpenVPN tab...
Don't forget to limit access from one LAN to the other by appropriate firewall rules on the respective interface, if you allow any-any, everything will be open. :-)
Hi Chemlud,
I think there is a misunderstanding.
My router is working and setup only in OpenVPN client mode. The remote VPN servers are VPN services provided by companies (like VyprVPN).