Print Page - WAN_DHCP6 Gateway missing

Title: WAN_DHCP6 Gateway missing
Post by: netgeek on July 10, 2019, 02:54:42 AM

Under System -> Gateways -> Single only my WAN_DHCP gateway is listed after upgrading to RC1. I've tried this on two different machines, and reset config to factory. They both are getting IPv6 addresses via DHCPv6, which I can see on the cli.... I just don't have a gateway

Title: Re: WAN_DHCP6 Gateway missing
Post by: netgeek on July 10, 2019, 03:13:26 AM

It seems to be cosmetic only, as I can still use IPv6 to get to places, and netstat -rna6 shows my IPv6 default route. It's just missing from the GUI.

Title: Re: WAN_DHCP6 Gateway missing
Post by: netgeek on July 10, 2019, 05:19:31 AM

And I have a 3rd box that shows it just fine.

Title: Re: WAN_DHCP6 Gateway missing
Post by: donatom3 on July 10, 2019, 08:53:52 AM

I'm seeing the ipv6 gateways on mine. I'm using DHCPv6-PD for IPV6 though.

Title: Re: WAN_DHCP6 Gateway missing
Post by: franco on July 10, 2019, 09:07:12 AM

Hi,

I think I've seen this a while back:

https://github.com/opnsense/core/commit/d8e17d77377

We'll discuss this internally and see what we shall do to improve this.

Thanks,
Franco

OPNsense Forum

Archive => 19.7 Legacy Series => Topic started by: netgeek on July 10, 2019, 02:54:42 AM