Text only | Text with Images

OPNsense Forum

Archive => 19.1 Legacy Series => Topic started by: Bytechanger on May 24, 2019, 10:56:14 AM

Title: OpenVPN client tap - routing traffic?
Post by: Bytechanger on May 24, 2019, 10:56:14 AM
Hi,

I want to connect to another network via OpenVPN TAP.

My network is 172.30.90.0/24
Other Network 192.168.1.0/24

The tunnel starts and the OpenVPN device is up with an IP Adress from 192.168.1.0/24.
Traffic should go from my network to 192.168.1.0 network (from other to mine not required).

How can I configure that all 192.168.1.0/24 traffic is routet to the other network?

Greets

Byte
Title: Re: OpenVPN client tap - routing traffic?
Post by: mimugmail on May 24, 2019, 12:28:43 PM
What is the reason using tap?
Title: Re: OpenVPN client tap - routing traffic?
Post by: Bytechanger on May 24, 2019, 01:25:34 PM
Hello,

I don´t know. I can´t change it. It´s not my OpenVPN Server.
So I need a solution.

At this time, it worked with an Raspberry

Greets

Byte
Title: Re: OpenVPN client tap - routing traffic?
Post by: Bytechanger on May 24, 2019, 03:02:06 PM
So I need a solution.

Can anyone help me?
Create a route or else?

Greets

Byte
Title: Re: OpenVPN client tap - routing traffic?
Post by: mimugmail on May 24, 2019, 08:15:17 PM
Normally you only use tap for bridging and not routing. Can you post logs when reconnecting?
Text only | Text with Images