Question about routes. I can change this, I just set it up to access the firewall if the LAN settings weren't correct. Not a firewall expert here, but can usually figure it out. On our Fortinet, we have to statically assign the route from 17.16.0.0/16 to 192.168.1.2 as the Gateway. Our internal network being 172.16.0.0/16 and the gateway being our core switch at 192.168.1.1.
Here are our routes now:
https://i.imgur.com/xDZKGvX.png
Should I just delete the Management LAN and use the LAN interface and set it's route to 172.16.0.0/16 with a gateway of 192.168.1.2?
I just want easily be able to access to make changes in the event I don't have something correct.
Under Interfaces, I have the LAN Interface set to 192.168.1.2 as the Gateway. Just not sure, looking at the routes, if I needed to do anything else. Since it shows link#, and 192.168.1.0/24 and 172.16.0.0/16 have different links.
Hopefully that's clear enough.
Short story:
I can ping out and into LAN from the firewall. I don't get a response from my workstation to internet OR firewall.