Hello
i did install
os-nut (installed) 1.4
went to service --> Nut
give a Name "APC UPS Pro 900"
mode is standalone
select the UPS Type
APCSMART driver
Log is recognised the APC,
Apr 27 06:44:53
kernel: ugen0.2: <American Power Conversion Back-UPS RS 900G FW879.L4 .I USB FWL4> at usbus0
Enable the APCSMART driver
Enable the nut service
but
nut_daemon Network UPS Tools
nut_upsmon Network UPS Monitor
both not running
root: /usr/local/etc/rc.d/nut_upsmon: WARNING: failed to start nut_upsmon
root: /usr/local/etc/rc.d/nut: WARNING: failed precmd routine for nut
have a nice day
vinc
OPNsense 19.1.6-amd64
FreeBSD 11.2-RELEASE-p9-HBSD
LibreSSL 2.8.3
Remove space in name
@mimugmail - this helps a bit but still ....
nut_daemon Network UPS Tools
Apr 27 21:26:39 root: /usr/local/etc/rc.d/nut: WARNING: failed precmd routine for nut
i tryed also to change
port=usbus0
port=auto
have a nice day
vinc
Tried usbhid driver?
yes i did but nothing same error
and it is fine recognised a apc is connected
kernel: ugen0.2: <American Power Conversion Back-UPS RS 900G FW879.L4 .I USB FWL4> at usbus0
i also find out it is possible to activate more then a driver in the same time, but i did check it only one dirver was checked.
have a nice day
vinc
i still got a error with nut
upsmon[31295]: UPS [APC_UPS-Pro-900]: connect failed: Connection failure: Operation timed out
@mimugmail
any thing else i could do to help to solve this problem?
have a nice day
vinc
Have you tried plugging usb cable out and in again? Also reboot?
yes i did - and get the feedback to have lost connection and found device again.
But then
nut_daemon Network UPS Tools
root: /usr/local/etc/rc.d/nut: WARNING: failed precmd routine for nut
because it is not working i have removed the USB Port to APC 900 Pro and also deinstalled from the GUI NUT.
This 2 days ago but still i got two Informtion in the
System Log
May 14 09:27:00 upsmon[42091]: UPS APC_UPS-Pro-900 is unavailable
May 14 09:27:00 upsmon[42091]: UPS [APC_UPS-Pro-900]: connect failed: Connection failure: Operation timed out
so maybe there is something not ok, i also have rebootet the firewall still the information is there
pkg remove nut
root@FW-03:~ # pkg remove nut
No packages matched for pattern 'nut'
Checking integrity... done (0 conflicting)
1 packages requested for removal: 0 locked, 1 missing
@mimugmail
i found out my APC 900 Pro brake :(
the firmware, and there is no why to upgrade it. :-\ >:(
I will have to find a new UPS hope a ABB PowerValue11RT 1 kVA will work too.
have a nice day
vinc