OPNsense Forum

Archive => 19.1 Legacy Series => Topic started by: Wombat on March 08, 2019, 01:42:33 pm

Title: [SOLVED] Since 19.1 upgrade, no new data captured for Reporting, health, Quality
Post by: Wombat on March 08, 2019, 01:42:33 pm

Since the upgrade to 19.1, the quality graph under Reporting/health has shown no new data under Quality (for WAN) tab.  The data graphed stops on 6 Feb (suspect that is when I updated from 18.7) whilst all other tabs show graphs with data up to the present.

Any idea why...appears the delay and packet loss data is no longer logged, unfortunate as I found it useful for our poor quality Rural ADSL WAN connection.
Thanks

Title: Re: Since 19.1 upgrade, no new data captured for Reporting, health, Quality.
Post by: franco on March 08, 2019, 02:15:24 pm

Hi,

Sure, see https://github.com/opnsense/changelog/blob/master/doc/19.1/19.1#L75


Cheers,
Franco

Title: Re: Since 19.1 upgrade, no new data captured for Reporting, health, Quality.
Post by: Wombat on March 31, 2019, 01:47:19 pm

Had the same, you need to Reset RRDS (Round Robin Data Set).  It is under one of the menu items must below display item in menu (can't be precise as I do not have access to GUI, off base and again failed to properly set up port forwarding!)

Sent from my SM-P585Y using Tapatalk

Title: Re: Since 19.1 upgrade, no new data captured for Reporting, health, Quality.
Post by: chemlud on March 31, 2019, 06:36:11 pm

Hihi, you answer you own question? What says your doctor? :-D

Title: Re: Since 19.1 upgrade, no new data captured for Reporting, health, Quality.
Post by: franco on April 01, 2019, 09:05:27 am

Not sure if my quick help there was needed. ;)

Title: Re: Since 19.1 upgrade, no new data captured for Reporting, health, Quality.
Post by: Wombat on April 13, 2019, 09:36:04 am

Quote from: franco on April 01, 2019, 09:05:27 am

Not sure if my quick help there was needed. ;)

Franco, that did help....just though I would include the solution in this post as well for people getting to this thread if searching for a solution.

Yep Chemlab, I answered my own question.

Sent from my SM-P585Y using Tapatalk

Title: Re: [SOLVED] Since 19.1 upgrade, no new data captured for Reporting, health, Quality
Post by: franco on April 14, 2019, 09:55:39 am

Okay, nice. Marking it solved.


Cheers,
Franco