Hello,
I have a recent Opensense 19.1.1 with basic settings and the following problem is occurring and I do not even know where to start verifying.
Since last Thursday I noticed a high consumption of disk by GUI interface (98%). I veirifiquei through cli (ssh) and with the df command also reported the same 98% usage.
Checking each directory and file, all added up to just over 3GB. I did this check with "# du-sh" on / and I have no other mount point.
I ran fsck, and no error is encountered.
When rebooting the system normalizes, but a few days later the information comes back and when it reaches 100% use, many services stop working complaining about lack of space and disk.
I was looking for a file to file and everything inside it came to a little more than 3GB.
# df -h
Filesystem Size Used Avail Capacity Mounted on
/dev/gpt/rootfs 49G 44G 5G 90% /
devfs 1.0K 1.0K 0B 100% /dev
devfs 1.0K 1.0K 0B 100% /var/unbound/dev
devfs 1.0K 1.0K 0B 100% /var/dhcpd/dev
# pwd
/
root@opnsense:/ # du -sh
3.6G .
Thanks for all
Hi there,
This is pretty odd.
> Since last Thursday I noticed a high consumption of disk by GUI interface (98%)
Not sure what this means. Do you use web proxy or intrusion detection or a captive portal?
Cheers,
Franco
Hello Franco,
I found this question on github;
https://github.com/opnsense/core/issues/3241
And I applied the correction indicates;
# opnsense-patch 5123277
Disk space problem has been fixed.
Answering your question, I only use web proxy and captive portal.
SOLVED by patch 5123277
Thanks
Oh, ok, that is also fixed in 19.1.2 which came out today.
Cheers,
Franco