Print Page - GUI web-proxy writes bad squid-conf

Title: GUI web-proxy writes bad squid-conf
Post by: steffda on February 25, 2019, 11:06:19 PM

Hello,
i'm using OPNsense since several days and tried to configure a web-proxy.
The following issues i found:
1. In "Proxy Auto-Config" --> Rules / Matches / Proxies the GUI does not accept "-" in Names and Descriptions. Clicking save the GUI is hanging several Minutes but does not save the settings.
2. In Forwarding Proxy ("Weiterleitungsproxy"), configured Ports are not saved and not written to the squid.conf.
3. In General Settings ("Allgemeine Proxyeinstellungen") clicking apply causes hanging the GUI for several minutes but squid is not starting.
In cache.log i find that:
"FATAL: No HTTP, HTTPS, or FTP ports configured
Squid Cache (Version 3.5.28): Terminated abnormally."

So, enough critisized, thanks for the great product!

Title: Re: GUI web-proxy writes bad squid-conf
Post by: franco on February 27, 2019, 12:08:18 AM

Hi,

Thanks, would you mind raising a ticket so this doesn't get lost in the forum?

https://github.com/opnsense/core/issues

Cheers,
Franco

Title: Re: GUI web-proxy writes bad squid-conf
Post by: steffda on February 27, 2019, 12:14:26 AM

Ok, copied it to Github.

Title: Re: GUI web-proxy writes bad squid-conf
Post by: franco on February 27, 2019, 12:16:38 AM

Super, thanks a lot! :)

OPNsense Forum

Archive => 19.1 Legacy Series => Topic started by: steffda on February 25, 2019, 11:06:19 PM