Print Page - OPNsense 19.1 High Availability [CLOSED]

Title: OPNsense 19.1 High Availability [CLOSED]
Post by: bdario on February 12, 2019, 02:40:39 PM

Hello there,
I need to configure a couple of firewall with Internet connection in High Avalability, so in case of down of the connection to Provider 1 the communication is routed on the radio link to Provider 2
In attached the image of the architecture that I would like to realise
Can some "Guru" validate or correct my solution?
Thanks so much
Best regards
Dario

Title: Re: OPNsense 19.1 High Availability
Post by: newsense on February 12, 2019, 02:50:06 PM

Looks OK, assuming printers are on a dedicated VLAN with proper FW rules

Title: Re: OPNsense 19.1 High Availability
Post by: bdario on February 12, 2019, 03:03:47 PM

Thank you newsense,
yes of course the printers are on a dedicated subnet
Cheers
Dario

Title: Re: OPNsense 19.1 High Availability
Post by: fabian on February 12, 2019, 06:46:19 PM

I would try to add both uplinks to both firewalls so if FW1 goes down, you don't need to switch the uplink. So I would suggest a switch in front of them if possible.

Title: Re: OPNsense 19.1 High Availability
Post by: bdario on February 15, 2019, 11:40:14 AM

Thanks Fabian,
they chose a multi-wan solution with just one firewall.
Best regards
Dario

OPNsense Forum

English Forums => General Discussion => Topic started by: bdario on February 12, 2019, 02:40:39 PM