Print Page - 19.1 Installer Segmentation Fault

Title: 19.1 Installer Segmentation Fault
Post by: pmsopnsense on February 11, 2019, 08:26:30 PM

Hi all :)
First time using OPNsense, it suffer core dump at Installer. However, terminal still allow to login root and configures and Ping etc, but once reboot all setting gone.

Help please, HP240 Intel Celeron N3060, 1Gbit LAN and D-Link DUB1312 USB Ethernet
Thanks in advance

Title: Re: 19.1 Installer Segmentation Fault
Post by: pmsopnsense on February 11, 2019, 09:41:50 PM

FYI, Just installed ipfire on same hardwares, and ipfire works properly.
USB Ethernet D-Link SUB1312 works properly
Regards

Title: Re: 19.1 Installer Segmentation Fault
Post by: weust on February 11, 2019, 10:57:37 PM

The losing settings after a reboot is because it ran the LiveCD (in case you were wondering).

Title: Re: 19.1 Installer Segmentation Fault
Post by: Steven on February 11, 2019, 11:07:04 PM

I had a similar issue happen. Turns out I needed to re-image my install media. Once I re-flashed the USB drive with OPNsense installer and ran again it worked. See if that solves issue, if not maybe another issue that may need workaround.

Title: Re: 19.1 Installer Segmentation Fault
Post by: pmsopnsense on February 12, 2019, 12:26:01 AM

Hi Steven and weust,
I re-images 4 times, 2 times for every mirror. ok try again in other days
Thank you for reply :)

OPNsense Forum

Archive => 19.1 Legacy Series => Topic started by: pmsopnsense on February 11, 2019, 08:26:30 PM