Print Page - [SOLVED] Wireguard duplicate Firewall Rule after update

Title: [SOLVED] Wireguard duplicate Firewall Rule after update
Post by: racef@ce on December 13, 2018, 07:10:57 PM

Hello,
I had set up a functional wireguard config in a "road warrior" scenario.
It no longer works after the required reboot of today's update to 18.7.9. it looks like a second Interface WG0 together with Interface WireGuard now shows up in the Firewall Rules section.

The solution was to duplicate the existing Firewall Rule for interface WG0 (view attachment).
It seems that interface: WireGuard is unnecessary, however you can not remove it.

Title: Re: Wireguard duplicate Firewall Rule after update
Post by: franco on December 14, 2018, 12:05:36 AM

https://twitter.com/opnsense/status/1073199933866602496

Title: Re: Wireguard duplicate Firewall Rule after update
Post by: racef@ce on December 14, 2018, 10:14:34 AM

Hello Franco,
Thanx, I already installed the newest plugin os-wireguard-devel 0.8_1 en restarted the Firewall.
In the Firewall Rule sections the interface: WireGuard remains.

Title: Re: Wireguard duplicate Firewall Rule after update
Post by: mimugmail on December 14, 2018, 10:27:53 AM

Did you assign an Interface in the past?

Title: Re: Wireguard duplicate Firewall Rule after update
Post by: franco on December 14, 2018, 12:46:00 PM

WireGuard group is correct, it is the same as IPsec and OpenVPN.

The wg0 is from manual interface assignment on your part. Both work interchangeably, but the group is for all devices, the individual devices are .... individual. ;)

Cheers,
Franco

Title: Re: Wireguard duplicate Firewall Rule after update
Post by: racef@ce on December 14, 2018, 04:35:41 PM

Thanks for your explanation Franco.
So it should be like that.

OPNsense Forum

Archive => 18.7 Legacy Series => Topic started by: racef@ce on December 13, 2018, 07:10:57 PM