OPNsense Forum
English Forums => General Discussion => Topic started by: lionelfontaine on January 29, 2020, 05:21:13 pm
-
Hi,
I have deployed opnsense's routers on each of my agencies.
Each router is configured with 3 lans (I, L, T), and 1 wan (W).
My 3 lans are set with gigabits interface.
I send and receive, from toip's application or toip's phone, all packets with DSCP equal to 46.
I want to setup opnsense to priorize packets with DSCP equal to 46, and apply best effort to others.
Despite careful reading of the shaper's documentation, i don't understand how i must operate.
Can you, help me on this subject?
Best regards
-
2 Pipes for Up and Down, scheduler FQ_Codel, 4 Queues, 2 each directions, one weight 10, one weight 100, 4 rules, 2 with match on dscp 46 and linked to queue with 100 and correct direction
-
Hi,
thanks for your answer.
I would need clarification:
- i create 2 pipes from 1000Mbs -> Upload / Download, with each pipes set only with scheduler FQ_CODEL, and all other options by default?
- to the queue, i set only weigth, no other option?
- to the rules, i need to Apply only on one interface?
I realize that I did not mention that I was not using the wan interface to pass packets
Best regards
-
1. all other by default, yes
2. only weight and link to pipe
3. hit advanced, only first interface, direction in and depending on interface it's down or up
-
Fast and precise! It's wonderfull.
Are you sure about scheduler FQ_CODEL? I thought I understood that the queues only work with weigthed fair queueing.
Just to be sure, there is no bandwidth constraint? Only a promotion of the HQ?
Anyway, big big thank you!
-
Yeah, I thought that too, but QFQ also supports Queues so this should be good to go.
-
I have tested and all seems ok ^^
Next, during the real production.
Thanks Again.
8)