OPNsense Forum

Archive => 19.1 Legacy Series => Topic started by: davorin on March 03, 2019, 02:22:25 pm

Title: User - VPN - IPsec xauth Dialin missing in user settings
Post by: davorin on March 03, 2019, 02:22:25 pm

Good afternoon

As I am not successful currently in bringing up a VPN to a FBox which could be setup easily with a Juniper SRX I try now to follow this guide to setup a remote ipsec client:

https://wiki.opnsense.org/manual/how-tos/ipsec-road.html

There it says under user privileges to add the user to "User - VPN - IPsec xauth Dialin"....but this option is missing in 19.1.2...I only see:

Code: [Select]

GUI Status: IPsec
GUI Status: IPsec: Leasespage
GUI Status: IPsec: SAD
GUI Status: IPsec: SPD
GUI Status: System logs: IPsec VPN
GUI Status: System logs: IPsec VPN
GUI VPN: IPsec
GUI VPN: IPsec: Edit Phase 1
GUI VPN: IPsec: Edit Phase 2
GUI VPN: IPsec: Edit Pre-Shared Keys
GUI VPN: IPsec: Mobile
GUI VPN: IPsec: Pre-Shared Keys List
Xauth not allowed anymore in opnsense?


thanks in advance
richard

Title: Re: User - VPN - IPsec xauth Dialin missing in user settings
Post by: davorin on March 03, 2019, 02:53:51 pm

Ah okay..seems to be not needed anymore....also the Phase 1 peer identification.

I thought IPsec would be much easier with opnsense as with Juniper SRX, but it isn't (o;

No way so far I can connect to a fritzbox or connect to it remotely with a macos client...