OPNsense Forum
Archive => 19.1 Legacy Series => Topic started by: dreamerman on April 07, 2019, 12:36:35 am
-
I managed to get latest and updated v19.1.5 working. My dashboard GUI looks fine and works but the console is showing something different - see pic. Looks like it is still stuck at booting. I can restart console via GUI but each time it is still stuck at booting. Is that normal? If not I won't "roll out into production" even though it is only for home network.
-
can you switch your system to UEFI boot? That fixed it for me.
-
can you switch your system to UEFI boot? That fixed it for me.
Thanks, I tried UEFI but it won't even boot. In BIOS it is set as LEGACY.
-
Change the BIOS to UEFI.
and possibly(!) reinstall via UEFI boot so it makes the EFI partition(s).
-
Change the BIOS to UEFI.
and possibly(!) reinstall via UEFI boot so it makes the EFI partition(s).
Did that and that including MBR and GPT as well.
-
Set primary console to EFI, no secondary console? System: Settings: Administration.
-
Set primary console to EFI, no secondary console? System: Settings: Administration.
Is that Console Redirection under advance settings?
-
Section "Console", vt driver should be enabled, primary to "EFI Console", secondard to "None".
Cheers,
Franco
-
Section "Console", vt driver should be enabled, primary to "EFI Console", secondard to "None"
Franco, I looked at all the options but there are no EFI CONSOLE.
-
Franco, this is another console option.
-
May be Franco mean that console:
-
Thanks Antaris, will try that.
-
What OPNsense installer image are you using?
VGA or Serial?
-
Antares is right, I meant the GUI....
Thanks,
Franco
-
What OPNsense installer image are you using?
VGA or Serial?
It is VGA
-
Section "Console", vt driver should be enabled, primary to "EFI Console", secondard to "None".
Did as you suggested but result the same. Still stuck at booting.
-
In the console? Or in real life? Can you reach the GUI after some time on one of your interfaces?
-
In the console? Or in real life? Can you reach the GUI after some time on one of your interfaces?
I can reach GUI no problems on a laptop connected to opnsense machine. The machine is connected to a monitor via VGA cable (no HDMI option). The scrip on the monitor is stuck at "booting...." while in the background the scrip rolls on silently. After a while I can use the laptop to reach GUI.
-
I have decided to ignore being stuck at boot since the GUI works fine. Hopefully future upgrades will solve this issue for me.