16
Hardware and Performance / Re: Trying out OPNSENSE and must be missing something related to performance config
« on: April 24, 2018, 07:20:09 pm »
Got it - i believe this is called the swap method. I may just have to give that a shot. I don't have a managed switch but am somewhat familiar with robocfg on the asus routers with merlin firmware. I've defined a few vlans already for internal lan use so this wouldn't be much different.
Which vlan vid did you configure your switch to? And why the 3 ports when you're only using 2 of them?
My goal is a more automated solution where the gateway either remains plugged in or can be plugged in periodically to renew the authentication. During this 6 months no issues renewing? I recall reading in other threads that eapol renewal occurs every 14 days.
Absolutely no issues with youtube here on att gigabit. I've streamed 720p/hd/4k/8k successfully. Granted 8k stutters because of lack of gpu/cpu processing power, not lack of bandwidth. If you have snort enabled for web traffic, that might be your issue.
Which vlan vid did you configure your switch to? And why the 3 ports when you're only using 2 of them?
My goal is a more automated solution where the gateway either remains plugged in or can be plugged in periodically to renew the authentication. During this 6 months no issues renewing? I recall reading in other threads that eapol renewal occurs every 14 days.
Absolutely no issues with youtube here on att gigabit. I've streamed 720p/hd/4k/8k successfully. Granted 8k stutters because of lack of gpu/cpu processing power, not lack of bandwidth. If you have snort enabled for web traffic, that might be your issue.