Topics

Hello,
I am using Multiwan with a PPPoE Telekom and DHCP Unitymedia connection and recently I have noticed when the DCHP gateway goes down it doesn't always loadbalance or use specified gateway properly anymore. This happens after some time. Maybe every 24 or so I am not sure yet. I have set up to use HTTPS to use the Unitymedia line and when this issue happens it switches to the Telekom line like it should (By checking the IP online) but doesn't switch back and load balancing gateway group rules doesn't work too anymore. When I log into OPNSense I then see both gateways up and running.

I have to change anything in the Firewall to fix this like enabling shared forwarding or editing a rule. I have the disable force gateway option enabled and have set up the gateways groups in the rules to use with monitoring enabled. Which logs would help to get to the root of the problem?

I have a very strange behavior since I have upgraded to 20.1. When I create or delete a rule sometimes it creates 3 duplicates of the same rule or even worse when I delete a rule it deletes a bunch of them. Rules even get removed that are assigned on a different interface! I don't know how this happends. Sometimes it happends nearly every time I create a rule and sometimes it only happends rarely.

Hello I managed to integrate Wireguard via Mullvad into my OPNSense mashine but I need way to bypass my IPTV traffic. From what I have read the allowed IPs in Endpoints might be the right option? I use 3 subnets. One for LAN, WLAN and one IPTV. I tried to insert my two subnets to exclude the IPTV net but this only results in that no device is using the VPN.

I got a really annoying problem when my ISP changes the prefix (I think every 24h) that the LAN doesn't get new IPV6 addresses and the internet is bascially down and I need to manually edit and save a LAN connection to get new addresses. Is this problem known? I connect over PPPoE with a 56 Prefix delagation over DHCPv6 and let the lan track the interface.