OPNsense Forum
English Forums => General Discussion => Topic started by: robertkwild on December 24, 2019, 12:24:59 pm
-
Hi all,
My setup is a bit advanced as I have trunked ie tagged all my vlans to the wap but I have made my pvid ie untagged vlan 4
My controller sees my wap fine and assigns it the correct vlan 4 dhcp ip 10.100.1.54
I have also ammended the default network on the controller to be 10.100.1.0/24 instead of the standard 192.168.1.0/24
But I cant adopt the wap on the controller and I don't know why as its getting the correct ip, I even can't ping or ssh into it
I have forgotten it on the controller and hard reset it but it's still not adopting
Any help please
Thanks,
Rob
-
You don't note any details about your OPNsense settings. Do you have any firewall rules configured for VLAN4 interface? The DHCP is likely being assigned by the auto-generated rules, but if you didn't specify anything else, then no other traffic will flow,