Home
Help
Search
Login
Register
OPNsense Forum
»
Archive
»
23.1 Legacy Series
»
[SOLVED] Version 23.1 Installation stuck at "booting"
« previous
next »
Print
Pages: [
1
]
Author
Topic: [SOLVED] Version 23.1 Installation stuck at "booting" (Read 1059 times)
ralpha
Newbie
Posts: 2
Karma: 0
[SOLVED] Version 23.1 Installation stuck at "booting"
«
on:
June 09, 2023, 08:03:23 pm »
Hi, I'm new in the forum as I want to go away from my Sophos UTM towards OPNsense.
I have a Sophos SG 115w rev.1 and I can't make OPNsense booting in the attempt to install it.
Seconds after starting I get the following error: Stopped at send kbd _conmand+0×49: movq %r12,%rdi
I wanted to attach a picture of the entire screen - but I can't make the image just 256KB and still readable.
* Googling didn't help me apart from this tip
https://exchangetimes.net/?p=559
which didn't solve the issue.
* Also botting in safe mode shows the same result.
* Tried different install mediums (DVD and USB)
* Installed Sophos UTM Software to check for hardware issues (this worked fine)
Any help is welcome
Cheer!
«
Last Edit: June 20, 2023, 12:30:14 am by ralpha
»
Logged
Seimus
Sr. Member
Posts: 320
Karma: 23
Re: version 23.1 Installation stuck at "booting"
«
Reply #1 on:
June 09, 2023, 09:54:08 pm »
This coudl be due to some config in the Sophos device bios.
Try to disable emulation of I/O ports 64h and 60h.
You can check as well this thread
https://forum.opnsense.org/index.php?topic=4196.0
https://www.reddit.com/r/OPNsenseFirewall/comments/vygwc9/sophos_sg115/
Regards,
S.
Logged
Networking is love. You may hate it, but in the end, you always come back to it.
OPNSense HW
APU2D2 - deceased
N5105 - i226-V | Patriot 2x8G 3200 DDR4 | EVO 980 500G
ralpha
Newbie
Posts: 2
Karma: 0
Re: version 23.1 Installation stuck at "booting"
«
Reply #2 on:
June 14, 2023, 11:31:40 pm »
Hey Seimus,
thank you very much! That was precisely it.
* I entered the BIOS by hamming the DEL key
* Went to the tab "Advanced" -> Menu "USB-Configuration" -> "Port 60/64 Emulation" set to "Disabled"
And without doing anything else it booted without any issues! I didn't even need to do the other stuff described in the links you referred to.
Thank you very much!
Cheers
Logged
Seimus
Sr. Member
Posts: 320
Karma: 23
Re: version 23.1 Installation stuck at "booting"
«
Reply #3 on:
June 18, 2023, 02:55:49 pm »
Glad to hear it helped you.
Have fun with your Sohpos OPNSense
P.S. If possible mark this thread as solved [SOLVED]. Adjust the thread name.
Regards,
S.
Logged
Networking is love. You may hate it, but in the end, you always come back to it.
OPNSense HW
APU2D2 - deceased
N5105 - i226-V | Patriot 2x8G 3200 DDR4 | EVO 980 500G
Print
Pages: [
1
]
« previous
next »
OPNsense Forum
»
Archive
»
23.1 Legacy Series
»
[SOLVED] Version 23.1 Installation stuck at "booting"