English Forums > High availability

OPNsense Firewalls Crashes in HA mode

(1/3) > >>

u63725:
Hi, I have two OPNsense Firewalls in HA Cluster. Both Firewalls have two ssd's in Raid 0 and runs on version 20.7.3. The Problem is, that firewall 1 hangs up after a half hour. After that firewall 2 becomes master and hangs also up after a half hour. There is no error in Logfiles or on the Screen. I removed one older SSD in firewall one. I could not find the reason for this problem.

mimugmail:
Raid0 in hardware Controller or Raid1 geom mirror? Maybe better Install on a clean setup with only one ssd

u63725:
Raid1 geom mirror

mimugmail:
Troubleshooting would look like this:

1) In cluster put a display on both units and watch for stack traces and collect logs
2) cut the cluster and let both units just run to see if they are alive for more than one day
3) User one FRESH ssd on each node, reinstall and restore config

u63725:
After Firewall one hangup Firewall two hangs also up after some minutes. On Firewall one is no error message on the screen, on Firewall two is an arp error:

https://imgur.com/a/SSmkGvk

Navigation

[0] Message Index

[#] Next page