1366
21.1 Legacy Series / Re: Outbound Nat Rewrite - how to monitor in logs?
« on: June 30, 2021, 05:23:06 pm »
understood. Thank you.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
server:
do-not-query-localhost: no
forward-zone:
name: "."
forward-addr: 127.0.0.1@8053
Unbound is set to LAN and WAN.cat /boot/loader.conf.local
amdtemp_load="YES"
ahci_load="YES"
aesni_load="YES"
if_igb_load="YES"
flowd_enable="YES"
flowd_aggregate_enable="YES"
legal.intel_igb.license_ack="1"
legal.intel_ipw.license_ack="1"
legal.intel_iwi.license_ack="1"
# this is the magic. If you don't set this, queues won't be utilized properly
# allow multiple processes for receive/transmit processing
#hw.igb.rx_process_limit="-1"
h#w.igb.tx_process_limit="-1"
net.pf.states_hashsize="2097152"
hw.igb.num_queues="0"
hw.igb.enable_aim="1"
hw.igb.enable_msix="1"
hw.pci.enable_msix="1"
hw.igb.rx_process_limit="-1"
hw.igb.tx_process_limit="-1"
vm.pmap.pti="0"
hw.ibrs_disable="0"
hint.p4tcc.0.disabled="1"
hint.acpi_throttle.0.disabled="1"
hint.acpi_perf.0.disabled="1"
dev.igb.0.eee_control="0"
dev.igb.0.fc="0"
hint.p4tcc.1.disabled="1"
hint.acpi_throttle.1.disabled="1"
hint.acpi_perf.1.disabled="1"
dev.igb.1.eee_control="0"
dev.igb.1.fc="0"
hint.p4tcc.2.disabled="1"
hint.acpi_throttle.2.disabled="1"
hint.acpi_perf.2.disabled="1"
dev.igb.2.eee_control="0"
dev.igb.2.fc="0"
hint.p4tcc.3.disabled="1"
hint.acpi_throttle.3.disabled="1"
hint.acpi_perf.3.disabled="1"
dev.igb.3.eee_control="0"
dev.igb.3.fc="0"
~$ iperf3 -p 5200 -f m -V -c speedtest.wtnet.de -P 2 -t 10 -R
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.03 sec 222 MBytes 186 Mbits/sec 379 sender
[ 5] 0.00-10.00 sec 219 MBytes 184 Mbits/sec receiver
[ 7] 0.00-10.03 sec 136 MBytes 114 Mbits/sec 38 sender
[ 7] 0.00-10.00 sec 133 MBytes 112 Mbits/sec receiver
[SUM] 0.00-10.03 sec 358 MBytes 299 Mbits/sec 417 sender
[SUM] 0.00-10.00 sec 352 MBytes 296 Mbits/sec receiver
snd_tcp_congestion cubic
rcv_tcp_congestion cubic
amdtemp_load="YES"
ahci_load="YES"
aesni_load="YES"
if_igb_load="YES"
flowd_enable="YES"
flowd_aggregate_enable="YES"
legal.intel_igb.license_ack="1"
legal.intel_ipw.license_ack=1
legal.intel_iwi.license_ack=1
# this is the magic. If you don't set this, queues won't be utilized properly
# allow multiple processes for receive/transmit processing
hw.igb.rx_process_limit="-1"
hw.igb.tx_process_limit="-1"
net.pf.states_hashsize=2097152
hw.igb.num_queues=0
hw.igb.enable_aim=1
hw.igb.enable_msix=1
hw.pci.enable_msix=1
hw.igb.rx_process_limit="-1"
hw.igb.tx_process_limit="-1"
vm.pmap.pti = 0
hw.ibrs_disable = 0
hint.p4tcc.0.disabled=1
hint.acpi_throttle.0.disabled=1
hint.acpi_perf.0.disabled=1
dev.igb.0.eee_control=0
dev.igb.0.fc=0
hint.p4tcc.1.disabled=1
hint.acpi_throttle.1.disabled=1
hint.acpi_perf.1.disabled=1
dev.igb.1.eee_control=0
dev.igb.1.fc=0
hint.p4tcc.2.disabled=1
hint.acpi_throttle.2.disabled=1
hint.acpi_perf.2.disabled=1
dev.igb.2.eee_control=0
dev.igb.2.fc=0
hint.p4tcc.3.disabled=1
hint.acpi_throttle.3.disabled=1
hint.acpi_perf.3.disabled=1
dev.igb.3.eee_control=0
dev.igb.3.fc=0