OPNsense Forum

Archive => 20.1 Legacy Series => Topic started by: bp11487 on March 04, 2020, 04:17:51 am

Title: HA Not Syncing
Post by: bp11487 on March 04, 2020, 04:17:51 am

     Good evening everyone! I am trying to setup an HA pair in a virtualbox environment before pushing it out to my home. I cant seem to get the configuration to sync from the master to the slave box. The allow all rule exists.... they can ping each other over their sync interface. All should be fine, correct?
     I can manually push the update over to the secondary box from the primary from the menu and it works fine. Im just not sure why its not automatically syncing. Im attaching a screenshot of my primary/slave box config as well!

Hope this helps!

Title: Re: HA Not Syncing
Post by: katamadone [CH] on March 26, 2020, 06:03:01 am

https://forum.opnsense.org/index.php?topic=15906.msg72971#msg72971

https://github.com/opnsense/core/issues/4000
https://github.com/opnsense/core/issues/3635
https://docs.opnsense.org/manual/hacarp.html
https://forum.opnsense.org/index.php?topic=16115.msg73704#msg73704

Title: Re: HA Not Syncing
Post by: BambosD on March 26, 2020, 07:32:25 am

I'm sorry to say that, but you have to read pfSense documentation to proceed into OPNSense.
Do you really expect to have community support ?

I have 3 posts with undocumented questions and no one answers.

I have managed to make high availability with OPN Sense. You need to assign a carb virtual ip on the same range of sync interfaces, for example 192.168.54.3
Then you have to go to dhcp services and say that the failover ip address for each box is the other one, and the default gateway of the lan is the CARB VIP. 

Good luck.

Title: Re: HA Not Syncing
Post by: katamadone [CH] on March 27, 2020, 12:59:42 pm

Quote from: BambosD on March 26, 2020, 07:32:25 am

I'm sorry to say that, but you have to read pfSense documentation to proceed into OPNSense.
Do you really expect to have community support ?

what a comment

Title: Re: HA Not Syncing
Post by: katamadone [CH] on March 27, 2020, 01:47:40 pm

look into: https://forum.opnsense.org/index.php?topic=15906.0