OPNsense Forum
Archive => 21.1 Legacy Series => Topic started by: fernat on May 26, 2021, 03:09:34 am
-
Just installed on a Lanner NCA-1510:
https://www.lannerinc.com/products/telecom-datacenter-appliances/vcpe-ucpe-platforms/nca-1510
For some reason the SFP interfaces aren't being detected. Is there something special I need to do to enable? The other 4 onboard NIC's are detected fine. I'm guessing I need to load a driver for the SFP's? I've tried adding if_igb_load="YES" to the tunables.
Forgive me for a noob question, making the move over from pfsense. Pfsesne detected the interfaces by default.
Output from pciconf -lv shows the devices:
none10@pci0:3:0:0: class=0x020000 card=0x0000ffff chip=0x15368086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'I210 Gigabit Fiber Network Connection'
class = network
subclass = ethernet
none11@pci0:4:0:0: class=0x020000 card=0x0000ffff chip=0x15368086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'I210 Gigabit Fiber Network Connection'
class = network
subclass = ethernet
And my 4 onboard NIC's:
ix0@pci0:6:0:0: class=0x020000 card=0x00008086 chip=0x15e48086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = 'Ethernet Connection X553 1GbE'
class = network
subclass = ethernet
ix1@pci0:6:0:1: class=0x020000 card=0x00008086 chip=0x15e48086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = 'Ethernet Connection X553 1GbE'
class = network
subclass = ethernet
ix2@pci0:7:0:0: class=0x020000 card=0x00008086 chip=0x15e58086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = 'Ethernet Connection X553 1GbE'
class = network
subclass = ethernet
ix3@pci0:7:0:1: class=0x020000 card=0x00008086 chip=0x15e58086 rev=0x11 hdr=0x00
vendor = 'Intel Corporation'
device = 'Ethernet Connection X553 1GbE'
class = network
subclass = ethernet
-
Hi guys,
I have the same with Dell server and Broadcom Adv. Dual 10Gb Ethernet network card that uses sfp. I do not see it with ifconfig or when trying to assign interfaces. Can someone please help here?
-
I'm trying to understand the problem wondering which SFP module was inserted? The post doesn't say.
Cheers,
Franco