Topics

Hi guys,

I am having issues routing multicast traffic. I have igmpproxy running, IGMP is working like a charme.
There is UDP multicast traffic coming inbound on my WAN2 interface: igb0_vlan8

Code Select Expand


tcpdump -i igb0_vlan8 -v -n udp and port 10000

17:53:41.239319 IP (tos 0x80, ttl 24, id 0, offset 0, flags [none], proto UDP (17), length 1356)
    87.141.215.251.4000 > 232.0.20.234.10000: UDP, length 1328
17:53:41.239842 IP (tos 0x80, ttl 24, id 0, offset 0, flags [none], proto UDP (17), length 1356)
    87.141.215.251.4000 > 232.0.20.234.10000: UDP, length 1328
17:53:41.241084 IP (tos 0x80, ttl 24, id 0, offset 0, flags [none], proto UDP (17), length 1356)
    87.141.215.251.4000 > 232.0.20.234.10000: UDP, length 1328


This needs to go to my local client sitting on my "MAGENTA" network (interface igb2).
Yet the tcpdump shows nothing:

Code Select Expand


root@gateway:~ # tcpdump -i igb2 -v -n udp and port 10000
tcpdump: listening on igb2, link-type EN10MB (Ethernet), capture size 262144 bytes
^C
0 packets captured
4 packets received by filter
0 packets dropped by kernel


I have the following rules in place:

WAN2

Code Select Expand


Pass IPv4 IGMP * * IPTV_MULTICAST * * IPTV IGMP
Pass IPv4 UDP IPTV_ROUTERS  * IPTV_MULTICAST * * IPTV Stream


And wide open on MAGENTA:

Code Select Expand


Pass IPv4 * * * * * *


Where the aliases are

Code Select Expand


IPTV_MULTICAST Network(s) 224.0.0.0/4, 232.0.0.0/4
IPTV_ROUTERS Network(s) 87.141.215.0/24, 10.48.0.0/16


Help is appreciated...
Thanks, Tobi

Hi Guys,

I did a fresh install of OpnSense and upgraded to 17.1.3 and it seems that there is no igmpproxy menu entry, and further the package is not listed under Firmware > Packages.

I can however install it from the CLI (pkg install) but, that doesn't bring back the UI views... am I missing something obvious?

Thanks!

Hi Guys,

this is my first time deploying OpnSense, so please be gentle. I did the basic setup and have LAN and WAN connectivity. Just wanted to check for updates, as I set up the box a couple of weeks ago in advance. Going through the UI System > Firmware > Updates and clicking "Check for updates" regardless of the mirror / flavour I choose, I get an error and the log says (newest statement on top):

Code Select Expand


configd.py: [347b0230-94c1-40ab-9516-6866e4fc0cf7] Script action failed with Command 'pkg rquery
"%n|||%v|||%c|||%sh|||0"' returned non-zero exit status 74 at Traceback (most recent call last): File
"/usr/local/opnsense/service/modules/processhandler.py", line 477, in execute stdout=output_stream,
stderr=error_stream) File "/usr/local/lib/python2.7/subprocess.py", line 541, in check_call raise
CalledProcessError(retcode, cmd) CalledProcessError: Command 'pkg rquery "%n|||%v|||%c|||%sh|||0"' returned
non-zero exit status 74

configd.py: [347b0230-94c1-40ab-9516-6866e4fc0cf7] view remote packages

configd.py: [a397dc8c-708e-4c88-ab39-87b2392e6de8] view local packages

configd.py: [e1d08521-5db9-4578-aa81-1680cac1e2a8] Script action stderr returned "pkg: No trusted public keys
found pkg: No trusted public keys found pkg: No trusted public keys found pkg: No trusted public keys found pkg:
Repository OPNsense cannot be opened. 'pkg update' required"

configd.py: [e1d08521-5db9-4578-aa81-1680cac1e2a8] retrieve firmware update status


The forum search did not yield any results for me, and google only points me to PfSense stuff...

Thanks for your help,
Tobi