OPNsense Forum

Archive => 19.1 Legacy Series => Topic started by: amitis5 on May 31, 2019, 12:09:01 am

Title: One to One NAT Kills Internet Access
Post by: amitis5 on May 31, 2019, 12:09:01 am

When I setup one to one NAT the machine statically configured to the LAN side 10.3.53.2, has no internet access.  As soon as I delete the 1:1 rule, it has access. 

Here's what we are needing:  I have a pool of public IPs, x.x.x.29/27 and I need x.x.x.31 to send and receive all traffic to 10.3.53.2 as it were an public IP.

I have setup VIP: x.x.x.31 Ip alias WAN interface

One to One NAT: WAN Interface, x.x.x.31 external IP, Source 10.3.53.2, Destination any, default reflection.

Firewall rules on WAN: *, * , 10.3.53.2, *

Outbound NAT is set to Automatic

What am I missing here? 

Thanks,

Title: Re: One to One NAT Kills Internet Access
Post by: ursus on August 18, 2019, 09:34:14 am

Hi

I have the same problem -> did you ever fix this?

Cheers
Ursus

Title: Re: One to One NAT Kills Internet Access
Post by: ursus on August 18, 2019, 10:47:01 am

In case you never did find the solution to your problem: https://forum.opnsense.org/index.php?topic=13865.0