OPNsense Forum
English Forums => Tutorials and FAQs => Topic started by: daxrob on August 01, 2018, 08:56:25 am
-
Hi,
I have a small PC with only one interface where I would like to install OPNsense. I would like to know if and how is possible to configure it to be the network default gateway and check all the connection between LAN and WAN.
clients -> LAN 10.1.1.0/24 -> OPNsense -> LAN 192.168.0.0/24 -> Internet
Thanks
Roberto
-
You need to work with VLANs if you only have one port but want a WAN and LAN and for this you probably also need a VLAN-capable switch.
Cheers,
Franco