OPNsense Forum
Archive => 17.1 Legacy Series => Topic started by: cwynd on March 21, 2017, 04:47:36 pm
-
Hi All,
I'm trying to install from the OPNsense-17.1-OpenSSL-vga-amd64.img via USB stick. Everything is fine until the OPNsense first menu, which does not correspond to the instructions: https://opnsense.org/users/get-started/ (https://opnsense.org/users/get-started/) Step 3
I am seeing this, I see no 'Configure Console', 'Quick/Easy Install' etc:
(http://i.imgur.com/k5vGSaW.png)
If I let the default boot continue, I think a live image boots (I hear the little tune) but the console shows 'Booting' (white on blue) followed by 'EFI framebuffer information' and then nothing more. I get the same result on an HDMI output as on the vga panel in the image above.
This same hardware will boot a SystemRescue USB with no issues.
I've used the other *Sense for about 10 years, so I do know a little about what to expect.
What am I missing?
-
That's the boot loader, not the running system. Can you show a picture of a completed boot?
Thanks,
Franco
-
Press escape at the boot menu, then do:
set kern.vty="vt"
boot
This should make the console work, once you get OPNsense installed, you will want to enable the "Use the virtual terminal driver (vt)" console driver option in System > Settings > Administration
-
Thank you! This got me a display where I could see what's going on - it is indeed booting the live image, and now I can see the installer timeout messages (which were not visible before), so I am off & running now I believe.
Thanks again :)
-
That's the boot loader, not the running system. Can you show a picture of a completed boot?
Thanks,
Franco
Per my other reply just posted, I now have a display where I can see the boot sequence ok, so I think I am all set. The completed boot screen now shows the expected live boot running menu - but with the early installer option along the way, which I will invoke next :)
Thanks for help!
cw.
-
cwynd,
Can you do me a huge favour and try if this image works out of the box?
https://pkg.opnsense.org/snapshots/OPNsense-201703120533-OpenSSL-vga-amd64.img.bz2
You don't need to install, just boot and see if it comes up without the kern.vty trick. :)
Thanks,
Franco
-
Certainly. Just downloading now..
-
cwynd,
Can you do me a huge favour and try if this image works out of the box?
https://pkg.opnsense.org/snapshots/OPNsense-201703120533-OpenSSL-vga-amd64.img.bz2
You don't need to install, just boot and see if it comes up without the kern.vty trick. :)
Thanks,
Franco
Yep it boots 'as is', no problems.
btw, this is the hardware I'm working on: http://mitxpc.com/proddetail.php?prod=JBC200F9N-2930-B with the 4-port daughter board.
-
Thanks, very cool 8)
The gist of this image is we are refreshing the 17.1 images on top of these boot fixes. 17.1 wasn't fully ready to follow FreeBSD, and unfortunately the old setting changed behaviour. But this is promising. Thanks again!
Cheers,
Franco
-
Great, you're welcome! Happy to be a small help.