OPNsense Forum
English Forums => Development and Code Review => Topic started by: jannisj on January 04, 2020, 04:18:45 pm
-
I tried to install Sensei according to the install guide.
After the wizard, were I chose to protect the lan interface, I can no longer connect to the webinterface of the opnsense box.
ssh is no longer connecting either.
Web browsing seems to work so far, but it's pretty useless if I cannot log into the management system...
Has anyone had this happen?
Opnsense is on newest patch level.
I had to stop the services from the console, and delete the os-sensei and elasticsearch5 packages, then reboot the opnsense box to regain access to the webinterface.
-Jannis
-
Had also a couple of problems with stability and crashes after installing sensei. Finally I decided to uninstall completely:
- unstable - causing crash/instabilities ending up with inaccesibility of the firewall- needed to shutdown the system and reboot a couple of times - finally I was a lucky guy and could access again the gui ..
- unreliable - switch to bypass mode and vice versa does not work properly ->the configured settings are not executed after exiting bypass mode
- lack of transparency -> regarding the complete rule setting - who is compiling the rules and categories, what exactly does cloud reputation etc, etc.
- others - dns resolving should be improved
Urmel
-
Good evening,
I would be curious to know your hardware (motherboard, processor, memory, sata or ssd hard drive).
Having several configurations, I am interested in all the information revolving around this module.
Cordially.
-
I tried to install Sensei according to the install guide.
After the wizard, were I chose to protect the lan interface, I can no longer connect to the webinterface of the opnsense box.
ssh is no longer connecting either.
Web browsing seems to work so far, but it's pretty useless if I cannot log into the management system...
Has anyone had this happen?
Opnsense is on newest patch level.
-Jannis
Hi Jannis,
Happy to help.
Which ethernet interface are you using for LAN (igb, em, re?) . Are there any VLANs configured for the LAN interface?
-
Hi Jannis,
Happy to help.
Which ethernet interface are you using for LAN (igb, em, re?) . Are there any VLANs configured for the LAN interface?
I'll doublecheck when I get home, but it's an enterprise intel nic in a Dell PowerEdge 210 II.
Xeon cpu, 16GB memory, 240GB SSD.
No VLANS's at all, very simple setup, just WAN and LAN ports on the same dual port intel nic.
-jannis
-
hi jannis,
Hardware side nothing to say.
If I understand correctly on the PowerEdge you have installed OPNsense version?, And you have access to it using the Web interface and / or in SSH.
This, locally in your company and / or also from your home, before the installation of sensei?
I did not understand if the blocking was local or remote?
cordially
-
I'll doublecheck when I get home, but it's an enterprise intel nic in a Dell PowerEdge 210 II.
Xeon cpu, 16GB memory, 240GB SSD.
No VLANS's at all, very simple setup, just WAN and LAN ports on the same dual port intel nic.
Jannis, this hw looks decent and should have no problems with Sensei. I'll PM you so that we have a look together.
-
hi jannis,
Hardware side nothing to say.
If I understand correctly on the PowerEdge you have installed OPNsense version?, And you have access to it using the Web interface and / or in SSH.
This, locally in your company and / or also from your home, before the installation of sensei?
I did not understand if the blocking was local or remote?
cordially
After I installed Sensei, I lost access to the opnsense webinterface and ssh.
This was on the LAN side of the appliance, I have not exposed the webinterface or ssh login to the WAN side
-jannis
-
Hello Jannis,
In my experience, I have had no problems with Sensei.
Your symptom of the joint loss of the web interface and / or SSH have your link in common.
Did you check if the leds of the parts and others were on.
I speak knowingly.
This is just a reflection.
As the description goes, I don't see any interactions.
Regards,
-
what if you disable "cloud threat intel" after installation?
-
Hello,
Interestingly, it did not occur to me to try.
I would test.
Regards,
-
Was there a fix for this issue. I've got the same problem.