OPNsense Forum
Archive => 17.1 Legacy Series => Topic started by: bcollins on February 06, 2017, 09:20:51 pm
-
Was trying to move from pfsense to opnsense and it did not seem to wan to work with the dell perc raid h700. simple vhd raid1....
-
If you have a server with a Dell RAID card, is it not suitable for virtualisation? OPNsense has been shown to work quite well as a VMware or Microsoft virtual guest.
Bart...
-
I agree but im using these as physical edge devices. 2x96gb dell r610 with h700 card. IF its not supported i can just create a geom mirror i suppose but it worked in pfsense 2.3.2 with no issue and fails in opnsense........
-
It depends on which OPNsense version you tried?
-
http://mirror.wdc1.us.leaseweb.net/opnsense/releases/mirror/OPNsense-17.1-OpenSSL-vga-amd64.img.bz2
this link to usb stick, booted and ran live with no issue. when tried to install it failed. should i try the previous version ?
-
Hi bcollins,
Have you tried OPNsense 16.7? OPNsense 16.7 was based on FreeBSD 10.3, which is the same FreeBSD version pfSense 2.3.2 is based on.
I would give it a shot because there could be an upstream FreeBSD issue causing the problems. As OPNsense moved to FreeBSD 11.0 I would also test an installing using that.
-
Same as me. Can install pfsense but cannot install OPNsense. I am using Dell R410. It always show the GEOM...header .... LBA. I am using SAS disks with RAID card. Running life has no problem but cannot install into HDD. Please help.
Tried version 17 and 16 already. Don't know why
-
Hi go2bar,
Have you tried to install FREEBSD 11.0 to see if you hardware is supported by FreeBSD?
If this works then try this alternative method to install https://forum.opnsense.org/index.php?topic=4526.0