Archive > 15.7 Legacy Series

[SOLVED] Backup/Restore always reboots after a restore with shellcmd

<< < (2/2)

romain:
I'm still not sure what's my trouble. But I have an Intel card which works fine and the OCE that have bad cksum all the time. So I'm trying to have the same option on my oce network ports :


--- Code: ---root@KISS0525002:~ # ifconfig igb0
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=400b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO>
        ether 0c:c4:7a:32:63:f4
        inet 80.80.236.214 netmask 0xfffffff0 broadcast 80.80.236.223
        inet6 fe80::ec4:7aff:fe32:63f4%igb0 prefixlen 64 scopeid 0x3
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
root@KISS0525002:~ # ifconfig oce0
oce0: flags=8043<UP,BROADCAST,RUNNING,MULTICAST> metric 0 mtu 1500
        options=507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO>
        ether 00:90:fa:9d:29:d8
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        media: Ethernet autoselect (10Gbase-SR <full-duplex>)
        status: active

--- End code ---

But nothing works. I already checked :

Disable hardware large receive offload
Disable hardware TCP segmentation offload
Disable hardware checksum offload

and rebooted the firewall.  The options are still there and I have bad cksum.

Howu can I be sure that the TSO and LRO are tuned off ?
Thanks

Navigation

[0] Message Index

[*] Previous page