1
24.1 Production Series / Re: 24.1_1 upgrade Webgui not working after reboot
« on: February 15, 2024, 01:23:12 am »
Same. Deleted os-dyndns and webgui functional again. Thanks for sharing.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Code: [Select]net.enc.in.ipsec_filter_mask = 0
= Enable Packet Filtering and NAT on if_ipsec, if_gre, if_vxlan and if_gif
net.enc.out.ipsec_filter_mask = 0
net.inet.ipsec.filtertunnel = 1
net.inet6.ipsec6.filtertunnel = 1
= Disable Packet Filtering and NAT on if_enc0 (Shown as IPsec in the GUI)
This is the mode that makes VTI IPsec (and more) filtered, but makes policy based IPsec unfiltered.
I have the same problem on a n100 mini pc. Funny enough, i have the exact same configuration on a esxi vm, no issues. Had to uninstall zenarmor only on mini pc. Both 8GB ram. Let me know what zenarmor has to say.
Thanks!
Guys, for the sake of trying to figure what is going on, what type of nics are you guys running this.
I am suspecting an issue with zenarmor talking with netmap, I have ZA only on one nic (realtek) and suricata on the wan.
The only time ZA does not go to 100% is if all my networks stop talking, not just the one it is attach to.
I have the same problem on a n100 mini pc. Funny enough, i have the exact same configuration on a esxi vm, no issues. Had to uninstall zenarmor only on mini pc. Both 8GB ram. Let me know what zenarmor has to say.
Thanks!
Have you tried to run a system audit and seeing what the results are? That looks like its related to php and/or python.
Goto System >> Firmware >> Status
Then choose "Health" from the "Run An Audit" button next to the "Check for updates" button. You may also want to look at the "Upgrade" audit as well. Something isn't right though. An audit should help you find it.
I have the latest version of OPNsense and Zenarmor and it's working fine but on one older firewall (Been through many OPNsense updates) I had to manually fix some upgrade issues with OPNsense for a proper install of dependencies for Zenarmor. So you are probably looking for dependency issues in the audit.
Have you tried to run a system audit and seeing what the results are? That looks like its related to php and/or python.
Goto System >> Firmware >> Status
Then choose "Health" from the "Run An Audit" button next to the "Check for updates" button. You may also want to look at the "Upgrade" audit as well. Something isn't right though. An audit should help you find it.
I have the latest version of OPNsense and Zenarmor and it's working fine but on one older firewall (Been through many OPNsense updates) I had to manually fix some upgrade issues with OPNsense for a proper install of dependencies for Zenarmor. So you are probably looking for dependency issues in the audit.
Instead of checking the update in a month's time, I recommend you to do it in a couple of centuries and see if it works well by then, in the meantime use Adguard:
https://forum.opnsense.org/index.php?topic=22162.225