Messages

Mattia, i used pirelli, motorola, zyxel with good results


Gesendet von iPhone mit Tapatalk

Mattia, why not using a external DSL modem in bridge mode and OPNSENSE doing the PPPoE


Gesendet von iPhone mit Tapatalk

@dokukäfer Ich meine die 15.7.x version.

Es wäre schade, wenn die wir die Keys und die verwendeten Zeichen für die Vouchercodes  nicht mehr wählen könnten. Ich denke die Funktionen die Monowall beinhaltet hat, sollten auf jeden Fall beibehalten werden.
jakob

Hollsten, was soll ich zurücknehmen? Meine Antwort?
Jakob

@Hollsten,
Wenn Du in Captive Portal / Settings / Vouchers rein gehst kannst du den Character Set selbst bestimmen.

Du brauchst nur einen Voucher Typ, der mit dem Voucher Code. Das einloggen mit User und Pw hat nichts mit der voucher Implementation zu tun.
Gruss Jakob

BertM, may be you could try to install the OpenDNS client in the win DC. So this win DC will get its "external" address resolutions from OpenDNS. (I do not have WIN AD know kow )


Gesendet von iPhone mit Tapatalk

Ich denke wir müssen warten bis 16.1 kommt. Wenn ich mich nicht irre wird bis dann der ganze Captive Portal Code erneuert.

@BertM, in regard of parental control and service filtering.
OPNsense is actually very good and efficient at this. There is a OpenDNS Client in it which allows you to determine which content and services you allow. Further on it acts also as a excellent phishing filter.
You will find this service entry under Services:DNS tools: Filter
Jakob

You dont need to reinstall. Best you do a factory reset and start from there


Gesendet von iPhone mit Tapatalk

If your modem act as DHCP server then i would configure the WAN interface of the OPNsense as a dhcp client.


Gesendet von iPhone mit Tapatalk

What i conclude from your responses: you can ping the dns server. Can you ping www.google.com from your PC?


Gesendet von iPhone mit Tapatalk

Patrick, could you pls do the tests I suggested. This helps to do the trouble shooting.

Patrick,
What kind of switch is between the PC and the router?
Your PC has the static IP address 192.168.1.136 right ?

Do the following:
- disconnect the cable between switch and OPNsense
- ping 192.168.1.1 You should get timeout
then
connect the cable between switch and OPNsense
- ping 192.168.1.1 You should get a positive response
- ping 68.116.46.115 You should get a positive response
- ping 24.205.192.61 You should get a positive response

Patrick,
I have never seen that a provider provides a private address for a DNS. This could be specific to charter, so I can't help about this point. My suspicion is that the modem has also a 192.168.1.1 address as your OPnsense. Pls check this.

Patrick, i see a dns address 192.168.44.1. can you explain? This is weird. What is the ip address of your modem? If you enter in one of your win pc's ipconfig what is the output of thus?


Gesendet von iPhone mit Tapatalk