Connect to the firewall console, log in and set the interfaces correctly using option 1
Are you still booting from the installer ISO? How else could you fall back to what seem to be the default settings?
QuoteAre you still booting from the installer ISO? How else could you fall back to what seem to be the default settings?
Quote from: doktornotor on November 05, 2023, 01:39:22 pmQuoteAre you still booting from the installer ISO? How else could you fall back to what seem to be the default settings?Well i had somewhat the same experience here https://forum.opnsense.org/index.php?topic=36683.msg179463#msg179463I had the console active, and discovered that OPNsense was somehow thinking it had to run the "interface importer" on rebot. And then you'll end up with Lan on first phys , and Wan on 2'nd.My solution was to tick "Prevent Interface removal" , on every interface.So it is possible to get your interfaces reassigned, if/when some "Boot time algo" decides "No default interfaces found - Running interface assignments".That said I was importing lot's of interfaces from a pfS config ... But they all looked valid before the reboot. And was left "untouched" on boot , if i ticked "Prevent Interface removal" ...I'll be ticking that on all my IF's .. Don't want any surprises.
I'm as green a June grass here - - - where do I find this 'Prevent Interface removal' tick box - - please?