Topics

Hi.
I hope someone can help. I keen to upgrade my hardware and the dec 2752 would fit my requirements I think but if your not using ids would the unit give be able to use the full speed of an 8gb/8gb connection. I have a 10gb lan and some 10gb devices already. Any feedback on this unit appreciated.
Thanks

So after upgrading my live router all seemed well but I seem to have a problem with exporting the client config.

Opting for file only everything seems fine but when importing the configuration to the openvpn client there is no option to add user credentials. The log file also reports username/password credentials missing when trying to connect.


Any help appreciated.

Thanks

Hi,

I have a couple of opnsense qotoms all working well and have used the new ddclient plugin for sometime. I use a custom ddclient.conf file rather than the gui option. This has worked fine with no issues but I now find everytime I reboot either box the ddclient.conf config is lost - file comes blank so I have to load up a copy of the .conf file back to the system.

Any way to fix this as it never use to happen.

Thanks

Hi,

I fired up my old apu and did a fresh install of 22.7. Whilst that all went well I keep getting this error when trying to check from updates from the console and in the gui...

Enter an option: 12

Fetching change log information, please wait... Certificate verification failed for /C=BE/O=GlobalSign nv-sa/CN=GlobalSign GCC R3 DV TLS CA 2020
34389172224:error:1416F086:SSL routines:tls_process_server_certificate:certificate verify failed:/usr/src/crypto/openssl/ssl/statem/statem_clnt.c:1921:
fetch: https://pkg.opnsense.org/FreeBSD:13:amd64/22.7/sets/changelog.txz: Authentication error

Any ideas?

thanks

I have had a few crashes lately after applying the last couple of updates. Some of them have been fatal trap:12 page fault in kernel mode....Is this related to hardware at all? Msata drive in use at the mo.

I always submit the error reports but yet to hear anything back.
Thanks

Hi,

I have a couple or opnsense qotom units and encountered a problem applying the latest update to one of them remotely. The process appeared to hang during the last couple of bits. I was applying the update through the console.

I did reboot the unit afterwards but on running a health audit I am getting the following. Is there anyway to roll the whole patch back or fix the problem without having to rebuild etc?  If I run another update the console reports no updates required.

any help appreciated, thanks

***GOT REQUEST TO AUDIT HEALTH***
Currently running OPNsense 20.7.8 (amd64/OpenSSL) at Sat Jan 23 12:07:59 GMT 2021
>>> Check installed kernel version
Version 20.7.8 is correct.
>>> Check for missing or altered kernel files
No problems detected.
>>> Check installed base version
Version 20.7.8 is correct.
>>> Check for missing or altered base files
Error 2 ocurred.
bin/freebsd-version:
                size (3333, 3322)
                sha256digest (0xecc8d07441731cd576e28932aaee79331974078011f879d750fee3c95941f773, 0x5070d97d187538b03bd325ca7bb64097c00d256043a7fad74c2adbf89d44fb1c)
boot/loader.efi:
                sha256digest (0xbacf690ee7d8a934da979e9a12789cafc92e386e8a6ebfa04be5fe1466f67232, 0xf50eddba00e3c572358adca9a64c7686ede30ee2b53459461f3cfb5993e8c575)
boot/zfsloader:
                sha256digest (0x74dc7d85890384bce5aacff355cb73f987e9c3367d9d6ee99282f6a5719e20d8, 0xea8000cc0a0e7174b04614b1718b91ea13c1c23a8290ff90263ed1021671e3ff)
boot/pxeboot:
                sha256digest (0x15a48a495353915dc6484fcf03ca3c38d885c911d935d644ade7ca4a5b0b6972, 0x437bc252f3e8fdd9c430af9e38125230703b2c15acd32e9dd83bf141d666b0de)
boot/loader:
                sha256digest (0x74dc7d85890384bce5aacff355cb73f987e9c3367d9d6ee99282f6a5719e20d8, 0xea8000cc0a0e7174b04614b1718b91ea13c1c23a8290ff90263ed1021671e3ff)
boot/userboot.so:
                sha256digest (0xf88669f52c817a3c7e13095e5a5c1d023dca1a336654261c297eccb7a27413b8, 0xe69d0be1081ef0615435f8262fe0b76e645a6f0d4732d8b638c9c28edb192cc7)
boot/userboot_4th.so:
                sha256digest (0xf88669f52c817a3c7e13095e5a5c1d023dca1a336654261c297eccb7a27413b8, 0xe69d0be1081ef0615435f8262fe0b76e645a6f0d4732d8b638c9c28edb192cc7)
boot/userboot_lua.so:
                sha256digest (0xc80021eb2725c1d2bbc690f87247521472339e000ea05947c43edbbd18fadd15, 0xecefa95a76283aaa4ba3e5fa3504ef43caef451f96bce0dc247302784973755d)
boot/loader_4th:
                sha256digest (0x74dc7d85890384bce5aacff355cb73f987e9c3367d9d6ee99282f6a5719e20d8, 0xea8000cc0a0e7174b04614b1718b91ea13c1c23a8290ff90263ed1021671e3ff)
boot/loader_lua:
                sha256digest (0xa974491ed049c5035f5df1f125067509e83373a54c1645850ce31a5eb3f8ee92, 0xfb48d7ee6589cdd387881250c9447c0b53fa6766d46b0d531961a96a71579394)
boot/loader_simp:
                sha256digest (0x7c007c426776835936cbc17112f801c283e7bece4a72e4334ef82810c2958626, 0x4730070de59b5445e300a0c3efc2b8f175136b1f2ea5b35bab3382c4d07d27f9)
boot/loader_4th.efi:
                sha256digest (0xbacf690ee7d8a934da979e9a12789cafc92e386e8a6ebfa04be5fe1466f67232, 0xf50eddba00e3c572358adca9a64c7686ede30ee2b53459461f3cfb5993e8c575)
boot/loader_lua.efi:
                sha256digest (0x90d46e3deef945666f9d413ef4ec5d346a86b195f20de91fa0bc49a90ef54377, 0xb9059794ded528a17f2b5256d879014173033ce591974f870f653ea4120f452a)
boot/loader_simp.efi:
                sha256digest (0x8aa8c3f5e9b310dabf42cc806ef8e4bcf3d369d9f2d407d033621fa4b00813f2, 0xf789f68174e3fc77241821c530077fe1699858896c67c24559d5f68a9c193f58)
lib/libcrypto.so.111:
                size (3060000, 3059968)
                sha256digest (0x77c0de26823c8071bc490b22e604af911131fc0a220e08cfe5b720a32339343a, 0x82355cd9619efa3e8278819f6b021fa6eceb2abc50757be5c3bc8c6bdba35368)
sbin/pfctl:
                sha256digest (0xc86465d13df7511191f0bbbb39e25dd91f06f5f185c34ab73343a9133db969b1, 0x77a24f3d7ba245e8673c846d6d3479bd7bb22f8b6bcb7d9cdc317b87b9030e23)
usr/bin/llvm-extract:
                size (8427144, 4808192)
                sha256digest (0x74348d2fa988399977943c36ff446264dbfccb71431bfe042c37cb0d0f15dbca, 0xa694f3bdc07abb31bb87d552cbca51d446ba37198ba5b6aa14add017e6848ff7)
>>> Check for missing package dependencies
Checking all packages: .......... done

Hi,

Been using opnsense for a little while and wondered if there is any way I can apply updates to my spare units which are for backup in case my main router goes down..

Is it possible somehow to apply updates as and when to these secondary box's across my main network without having to just re-install opnsense on these units from scratch to apply the latest updates?
appreciate this might not be possible but any ideas appreciated.

cheers

Hi,

Have been using opnsense for the last few years and its just great so thank you for all the work.

When I first started using it I used to get the occasional issue with the vpn service where the gui would report the service was not running. I am now getting this again with the version I am on being OPNsense 20.1.7-amd64. My inbound VPN still works even though the gui reports it's not and reports the service is not running either.

Is there any fix/workaround for this please?

many thanks

Examples below from the gui.

OpenVPN

Server UDP:1194 Client connections
Name/Time   Real/Virtual IP   
[error]
0   Unable to contact daemon
Service not running?   

Hi,

I wondered if anyone can help or answer a query I have please.

I wish to use a draytek vigor 130 vdsl modem (uk version) but it only has one Ethernet port. It would be great if I could access the modems gui via my lan but this would mean having to get opnsense to allow me to see the modems lan address via the wan port.

I know draytek routers and some asus routers can do this with the right commands so wondered if it would be at all possible via opnsense. I would like to be able to see the modem stats for my vdsl line without having to disconnet my qotom due to the modems 1 ethernet port...

any help or clarification appreciated.

thanks