[SOLVED] ERROR libre SSL - wrong place in documentation

[vikozo]

Hello
to configure libreSSL or openSSL (https://docs.opnsense.org/manual/install.html)
it say to go GUI |System⇒Settings⇒General
but i found it under
system, Firmware, Settings to select it.

I also find out to select libreSSL it still will show openssl in the Lobby Dashboard

have a nice day
vinc

[franco]

I'll fix the documentation right away, to be uploaded within a few days.

Also note the note below the firmware settings:

"In order to apply these settings a firmware update must be performed after save, which can include a reboot of the system."

OpenSSL and LibreSSL can't be installed at the same time, so as long as you switch but don't install....


Cheers,
Franco

[franco]

PS: The note will now also be part of the documentation.

[vikozo]

"In order to apply these settings a firmware update must be performed after save, which can include a reboot of the system."

ok this is important yes, but i could not do a update ...

[franco]

Did updates ever work for your system? What version did you first install, what are you running now?


Cheers,
Franco

[vikozo]

OPNsense 17.7.5-amd64 | FreeBSD 11.0-Rel-p12
and no it did never work. At this time the Firewall ist only conected to the LAN Port to the net

[franco]

Ok, as stated elsewhere you need to add a gateway to your LAN.

Or reassign your ports to use a WAN-only, in that case DHCP works and the box has instant internet access.


Cheers,
Franco